Multiviewer Blog Spot

still handles ..

In this post it's still handles ... I have a real passion for the handles (especially if I do them alone and they are so much economic ...).

materials are the usual:

- canete long and about 3 cm tall (70 cm x 2) 140 cm

- three-ply cord diameter 1 / 2 cm long and above.

the canete Folds in two for the direction of the long and overlap the two sides by sewing a 1 to 2 mm (maximum) on either side
Cut the cord into two pieces the same length , but not before covering up with masking tape on the cut point (if there is scotch the three open strings at once) and you place two strips obtained as in the photo below, then baste the side to open Cañete.

PS do not do as I did, that points to long basting .. if the points are shorter is better decisament.

then using the zipper foot sew the side tack (with pin would normally be impossible because of the thickness of the cords included.
Finally are also needed two stitches on either end of the handle, about 1 cm from the edge, so that the leads are attached to the Cañete.

In this way we obtained an invoice is not difficult to handle, with materials easily available, inexpensive, sturdy and functional!

Now I just attacking .. on bag next concorsino incoming!